GY-9960-3.3 RGB and Gesture Sensor (APDS-9960) เซนเซอร์ตรวจจับสี RGB และท่าทาง APD-9660

Features

ALS, infrared LED and proximity detector in optical module

Ambient Light Sensing (ALS)

– Human-like visual response

– Programmable interrupt function with upper and lower thresholds

– Up to 16-bit resolution

– High sensitivity operates behind dark glass

– Up to 1,000,000: 1 dynamic range

Proximity detection

– Fully calibrated to 100 mm inspection

– Integrated infrared LED and synchronous LED driver

– Eliminates close “factory calibration”

– 2000: 1 dynamic range

Programmable wait timer

– Standby power – 70μA typical

& – Programmable range from 2.72 ms to more than 6 seconds

I2C compatible interface

– Up to 400 kHz (I2C fast mode)

– Dedicated interrupt pin

– I2C 1.8V VBUS interface

Sleep Mode Power-2.5μA typical

Description: This is the RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand! This is, in fact, the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price.

The APDS-9960 is a serious little piece of hardware with built in UV and IR blocking filters, four separate diodes sensitive to different directions, and an I2C compatible interface. For your convenience we have broken out the following pins: VL (optional power to IR LED), GND (Ground), VCC (power to APDS-9960 sensor), SDA (I2C data), SCL (I2C clock), and INT (interrupt). Each APDS-9960 also has a detection range of 4 to 8 inches (10 to 20 cm).

9930

Download https://pan.baidu.com/s/14btIiusKEeH8K4v0UGlgeQ

1 Overview

APDS-9930 provides I2C interface-compatible ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with infrared LED in a single 8-pin package. The ambient light sensor uses dual photodiodes to approximate low lumen under 0.01 lux illumination The visual response of the human eye provides the high sensitivity that allows the device to operate behind dark glass. The proximity sensor is fully tuned for 100 mm object detection, eliminating the need for factory calibration of end devices and subassemblies. From bright sunlight to dark rooms, the proximity detection function works well. A micro-optical lens is added to the module to provide efficient transmission and reception of infrared energy, which can reduce overall power consumption. In addition, the internal state machine allows the device to enter a low-power mode, resulting in extremely low average power consumption.

2. Parameters

Working voltage: DC 3.3-3.8V

Output current: 0-20mA

Temperature range: -40 ℃ —85 ℃

3. Features

Optical module with integrated ALS, infrared LED and proximity detector

Ambient Light Sensing (ALS), which approximates the visual response of the human eye

Programmable interrupt function with upper and lower thresholds

Up to 16-bit resolution

High sensitivity working behind dark glass

0.01lux low lumen performance

Proximity detection, fully calibrated to 100 mm inspection

Integrated infrared LED and synchronous LED driver

Eliminates factory calibration of proximity sensors

Programmable wait timer, wait state power consumption-90μA (typical)

Programmable range from 2.7 ms to more than 8 seconds

I2C interface compatible, up to 400kHz (I2C fast mode)

Dedicated interrupt pin

Sleep Mode Power-2.2μA (typical)

Small package 3.94 (L) x 2.36 (W) x 1.35 (H) mm